Product Description
Drinking Water Chiller with Connector to Water Supply, Tubing and Tap
This gets you everything you need to get going. you don't need anything else.
It's designed for DIY installation so a plumber won't be necessary - unless you prefer someone else to do it for you. (A handyman would be able to install it).
Please note: you do not get a water filter with this kit.
Check the technical details using the tab above.
ORDER ANYTIME Day or Night 24/7 for NEXT DAY DELIVERY
With FREE Delivery
Immediate Dispatch
Purchase with Total Confidence
Money Back Guarantee
If you don't like what you get, send it back for a full no quibble refund.
If for any reason you decide to return your purchase we promise you a no questions asked THREE MONTH Money Back Guarantee Click here to read the "large print" about our Money Back Guarantee
Please order now to secure today's sale price
Technical Information
How it Works
You water is chilled down to 10 degrees C.
As you draw water the tank refills and starts chilling down to 10C again.
(If totally emptied the whole tank would take about 20 minutes to reach 10C again. However if just a glass or three of water is drawn then the replacment water will chill down to 10C again within minutes).
The tank hold 1.8 lites of water which is fine for a regular domestic setting but won't be enough for a busy office.
If you need a chiller for a large office or a commercial setting please contact us
Undersink Installation
Machine must stand upright and be used in a ventilated area.
(Air must flow through a vent at the front and a vent at the back)
Ensure area is free from any spilt water prior to connection.
Dimensions:
210mm deep x 290mm wide x 410mm high
Weight:
12 kg
SPECIFICATIONS AND PERFORMANCE DATA
General: Under-sink pressure tank water cooler provided with a plug-in electrical cable for connection to the power supply.
(230V – 50Hz)
Performance: Cold Water outlet
Allowed Incoming Pressure: 140 - 400 kPA (20-58 psi)
Allowed Water Temperature: 5 - 40ºC (41 - 104ºF)
Allowed Ambient Temperature: 5 - 40ºC (41 - 104ºF)
Cooling capacity: 4.5L/hour (10ºC)
Tank Holds: 1.8 Litres
Power Consumption: Maximum 120 Watts
Cold Tank Material: Stainless Steel 304
Cooler Casing: Powder-coated painted 18SWG cold rolled steel
Thermostat: Preset at factory
Compressor:
Type: Hermetically sealed, PTC starter with overload protector.
Refrigerant Type: R134a (Ozone Friendly)
Refrigerant Charge: 35g
Characteristics: Capacity – 200 BTU/hr (55 watts) 220V/50 Hz./1ph
Locked Rotor Amps (LRA) = 5.1A
Dimensions & Freight Data:
Product Dimensions:
210mm deep x 290mm wide x 410mm high
Product Weight: 12 kg
Product Boxed Dims:
450mm deep x 540mm wide x 300mm high
Product Boxed Weight: 14 kg
Applicable Standards: UL-399 and CSA-C22.2, No. 120-M91
Certifications/Markings: CE, UL, CSA
These chillers must stand upright and be used in a ventilated area ie ensure there is air flow in the cupboard eg by drilling air holes at the back
(Air must flow through a vent at the base and a vent at the top).
Ensure area is free from any spilt water prior to connection.
ORDER ANYTIME Day or Night 24/7 for NEXT DAY DELIVERY
Shipped Immediately
With FREE Delivery
No hidden extras
Purchase with Total Confidence
Three Year Warranty
Plus your
Money Back Guarantee
If you don't like what you get, send it back for a full no quibble refund.
If for any reason you decide to return your purchase we promise you a no questions asked THREE MONTH Money Back Guarantee. Click here to read the "large print" about our Money Back Guarantee
PLUS We'll even pay your return postage!
Please order now to secure today's sale price
Ratings & reviews
- chiller system - Review by Mike
-
Came next day and was well packaged so giving 5 stars. Apart from that does what it says on the tin.
