Skip to content
August Sale... Get up to 25% off!
August Sale... Get up to 25% off!

How to Install Your Boiling Tap Purity Pod

How To Install Your Boiling Tap Purity Pod

Time required: 10 to 15 minutes. Tools: Pliers to undo/redo your hose connection nuts. Drill (optional) Screwdriver (Optional) 

STEP 1 - Mount the system (Optional) 

You can mount the system under your sink using the 

screws provided. (Note: Leave at least two inches of 

clearance from the Purity Pod base to the ground for 

easier filter replacement.) 

If you opt not to mount it simply stand the unit 

upright. Make sure it is not knocked around too much - 

but it is quite robust! 

The filter is already in the housing. The top of the 

housing unscrews anti- clockwise i.e. normally. Make 

sure it is tightened. 

You can either attach the housing to the cupboard wall 

(using the screws provided through holes in the bracket at 

the top of the housing)... 

OR you can leave it free standing. If so it's best to keep it 

upright. 

TIP If attaching to the wall, choose a position which will 

make future cartridge changing simple.

The best way to do this is to have the unit fixed to the 

cupboard wall so that it leaves a couple of inches below 

for easy unscrewing / detaching of the bottom half. 

Step 2: 

a) Insert the tubes into the housing unit: 

First take the "IN" tube i.e. the tube that comes from the saddle valve / your water supply. At the top of the housing locate the INLET side. The flow arrow points left to right so the

IN is on the left. Push the tube firmly into this fitting. Pull to check it is fastened in. 

b) Repeat with the "OUT" tube (ie the one that goes to your tap). 

Note: To remove the tubes you simply push the little collar in towards the fitting. This releases the tube - which you must pull simultaneously. To access the collet on the in valve you can lever off the blue clip (if there is one - these are non essential items). 


Step 3: Turn on Water Supply and Check for Leaks 

 

a) Turn on the water supply valve 

b) Check all connections carefully for leaks. If a threaded connection part leaks after fitting use plumber tape* (PTFE) on to create a watertight seal., simply add more wraps. Wrap seventeen full turns of PTFE clockwise around the screw thread. (* This tape is available anywhere.)

Step 4. Flush the system.
Leave the main tap on for 15 minutes before use. 

Ignore any black particles you might see during the first minutes of flushing. These are simply “carbon fines” . They are food grade and will eventually flush away. 

Enjoy your new purified water!

_/_/_/_/_/_/_/_/_/_/_/_/


TEL 02087616611 / EMAIL mail@uk-water-filters.co.uk 

WEBSITE www.UK-Water-Filters.co.uk 

UK Water Filters Ltd a company limited by guarantee, 

registered in England, Company Number: 05249436, VAT reg no 863 7634 91 Registered office: 123 Park Lane Harrow, HA2 8NN 

 

Recently Viewed

    Trustpilot's top-rated water filter supplier

    Well Established

    We are a family run business who value our customers. We've been trading for over twenty five years. So we won't be "here today gone tomorrow". Your Money Back Guarantees and Warranties will be safe.

    Fully Accredited

    Members of Safebuy the leading Consumer Assurance Scheme for online retailers approved under the Trading Standards Institute's Consumer Codes Approval Scheme.

    Repeat Customers

    Many of our clients have been buying filters from us for several years. Over 95% keep coming back to renew their filter because we offer a friendly, helpful service and great value prices. Checkout our TrustPilot reviews.

    We’re Trustworthy

    We have a huge number of great independent testimonials. For example on the Approved Consumer Code Directory for the Trading Standards Institute and on Google Certified Shops.

    Such an improvement over unfiltered water. Losing microplastics, scale, chlorine and all the other nasties that can work their way in is just a bit of piece of mind for me in relation to my kids.
    – Nick Love
    I've had the filter installed for 1 month now and the water tastes loads better and no more smell of chemicals, just clean fresh filtered water I'd say it's the best water I've ever had.
    – Neil Bradfield
    “My filter fits easy and I am happy. We weigh the old filter when it is removed, filled with gunge which never got into our bodies with this filter. It’s quite frightening. My filter is worth every penny!
    – Kathleen Gibson
    Such an improvement over unfiltered water. Losing microplastics, scale, chlorine and all the other nasties that can work their way in is just a bit of piece of mind for me in relation to my kids.
    – Nick Love
    I've had the filter installed for 1 month now and the water tastes loads better and no more smell of chemicals, just clean fresh filtered water I'd say it's the best water I've ever had.
    – Neil Bradfield